Franklin City, Virginia: Private Well Water Quality
USGS models estimate the private-well arsenic exposure across Franklin City, and USGS laboratory samples from at least 6 wells in the county show measured nitrate, manganese, iron and pH. The arsenic figure is an area estimate; the measurements are of other wells — neither is a test of your own well.
This is a modeled probability for the area, not a measurement of your well. USGS statistical models estimate how many private wells in this area are likely to exceed the federal limit — they cannot tell you what is in your water. Two neighbors can have very different results. The only way to know your well is to test it.
~0
people estimated to rely on private wells with modeled arsenic above the 10 µg/L EPA limit
0–0
90% confidence range for that estimate
17% of wells
sampled by USGS in the county measured > 300 µg/L for iron (6 wells)
Find out what's actually in your well
Private wells are not regulated by the EPA — nobody tests wells in Franklin City for you. Arsenic, nitrate and coliform bacteria are the three most common private-well problems, and none of them has a taste or smell. A certified lab test checks all of them at once; the CDC and EPA recommend testing every well at least once a year.
Tap Score lab kit · 50+ contaminants · results in days
Or: quick at-home test strips on AmazonAmazon links are affiliate links — we may earn a commission at no extra cost to you.
Measured well tests in Franklin City
Unlike the arsenic estimate above, these are real laboratory results: the USGS has published chemistry from at least 6 wells in Franklin City, sampled 1994–2013. They describe other wells in the county — domestic, public-supply and monitoring wells — not your well.
| Parameter | Median | Wells over threshold | What the threshold means |
|---|---|---|---|
| Nitrate (as N) | Not enough USGS well samples in Franklin City (fewer than 5) — see the state page. | ||
| Manganese | Not enough USGS well samples in Franklin City (fewer than 5) — see the state page. | ||
| Iron6 wells | 0 µg/L90th pct: 29,565 µg/L | 17%Some | > 300 µg/L (EPA secondary standard). Aesthetic standard — rust-colored staining, metallic taste, clogged fixtures. Not a health limit. |
| pH | Not enough USGS well samples in Franklin City (fewer than 5) — see the state page. | ||
What the samples show
- Nitrate (as N): Not enough USGS well samples in Franklin City — see the state page.
- Manganese: Not enough USGS well samples in Franklin City — see the state page.
- Iron: Iron affects some wells: 17% of sampled wells were over the 300 µg/L staining standard.
- pH: Not enough USGS well samples in Franklin City — see the state page.
What to do about the biggest finding (iron): Test for iron; an oxidizing iron filter or a softener stops the staining, and reverse osmosis polishes the drinking-water tap.
Source: USGS well samples aggregated to Franklin City, Virginia — manganese, pH and arsenic from USGS ScienceBase 5f36baa782cee144fb3873e8 (site medians, 1988–2019); nitrate and iron from McMahon et al. (2019), Environ. Sci. Technol. 53:29–38 (NWIS wells). County assignment by Census 2020 boundaries. Statistics shown only where ≥ 5 wells were sampled. USGS well samples; not a test of your well.
What the arsenic estimate means
Arsenic occurs naturally in bedrock and can dissolve into groundwater, so it shows up in private wells with no color, taste or smell. The USGS estimate above combines a statistical model of arsenic probability with the number of people on domestic wells in Franklin City. A higher number means more of your neighbors are likely drinking water over the federal limit — but your own well could be higher or lower. Long-term arsenic exposure is linked to skin, bladder and lung cancers, so the EPA sets the limit at 10 µg/L.
What to do
- Test your well for arsenic, nitrate, manganese and iron — it's the only way to know your actual level.
- If arsenic or nitrate is present, install a reverse-osmosis system — carbon pitchers do not remove either.
- For manganese or iron staining, a whole-house oxidizing filter or softener is the fix; RO for the drinking tap.
- Re-test annually; well chemistry changes over time.
Iron: stop the staining at the source
Iron over 300 µg/L means rust stains and metallic taste house-wide. A whole-house iron filter or softener handles it; reverse osmosis polishes the drinking-water tap.
Whole-house well water system
Treats every tap, shower and appliance — the right scale for sediment, iron, sulfur and bacteria on a private well.
Compare on Amazon →Waterdrop reverse-osmosis systems
Under-sink RO removes arsenic, nitrate, lead and PFAS at the kitchen tap.
Shop on Waterdrop direct →APEC ROES-50 5-Stage Reverse Osmosis System
5-stage RO, ★ 4.7 — removes arsenic, nitrate, lead, fluoride and PFAS.
Check price on Amazon →Affiliate links — we may earn a commission at no extra cost to you. Re-test after installing to confirm the system is working.