Connecticut Private Well Water Risk: Arsenic & Nitrate

These figures are USGS statistical estimates for private (domestic) wells in Connecticut. They describe the area's modeled risk — not any single well.

Quick answer: Yes — arsenic occurs naturally in Connecticut groundwater. USGS modeling estimates about 52,105 Connecticut residents rely on private wells with arsenic above the EPA limit of 10 µg/L. The highest modeled exposure is in Tolland County (~12,109), Fairfield County (~11,418), New Haven County (~6,752). For nitrate, about 0% of Connecticut's ~673,000 private-well residents are modeled above the 10 mg/L limit. These are area estimates, not a test of your well — arsenic has no taste or smell, so only a certified lab test tells you your level.

This is a modeled probability for the area, not a measurement of your well. USGS statistical models estimate how many private wells in this area are likely to exceed the federal limit — they cannot tell you what is in your water. Two neighbors can have very different results. The only way to know your well is to test it.

Nitrate

0%

of the private-well population is modeled above the 10 mg/L nitrate limit

~0

people on wells estimated above the limit

~673,000

total residents on private wells statewide

Source: USGS machine-learning nitrate model, Ransom et al. (2022), domestic-well depth zone.

STEP 1 — TEST YOUR WELL WATER

Find out what's actually in your well

Connecticut has one of the higher modeled arsenic exposures in the country — but that number is an area estimate, not your well. Arsenic, nitrate and coliform bacteria are the three most common private-well problems, and none of them has a taste or smell. A certified lab test checks all of them at once; the CDC and EPA recommend testing every well at least once a year.

Compare home test kits on Amazon →

Basic screening only. Confirm arsenic, nitrate and bacteria with a certified lab.

Find a certified drinking-water lab

Amazon links are affiliate links — we may earn a commission at no extra cost to you.

Arsenic

Across Connecticut, an estimated ~52,105 people rely on private wells with modeled arsenic above the 10 µg/L EPA limit. The highest modeled exposure is in Tolland County (~12,109 people).

Counties with the highest modeled arsenic exposure

CountyEst. well residents over arsenic limit90% range
Tolland County~12,1098,740–16,678
Fairfield County~11,4187,738–16,791
New Haven County~6,7524,609–9,786
Middlesex County~6,0564,092–8,780
Windham County~5,8264,239–7,888
Hartford County~3,5912,395–5,304
Litchfield County~3,4742,348–5,052
New London County~2,8791,978–4,171

Source: USGS domestic-well arsenic model, Lombard et al. (2021); county population product (2017).

Measured well tests by county

The USGS has published laboratory results from wells in 8 Connecticut counties (at least 5 wells each). These are real measurements of other wells — domestic, public-supply and monitoring wells — not a test of yours. The tables rank counties by the share of sampled wells over each federal threshold.

Nitrate (as N): counties with the most wells > 10 mg/L (EPA MCL)

CountyWells overMedianSampled
New London County21%3.3 mg/L28 wells
New Haven County9%0.7 mg/L11 wells
Tolland County8%3.9 mg/L12 wells
Litchfield County7%0.8 mg/L14 wells
Hartford County2%2.2 mg/L86 wells

Manganese: counties with the most wells > 300 µg/L (EPA health advisory)

CountyWells overMedianSampled
Middlesex County40%30 µg/L5 wells
New London County26%51 µg/L27 wells
New Haven County22%7 µg/L18 wells
Hartford County16%10 µg/L91 wells
Litchfield County15%5 µg/L53 wells
Fairfield County11%40 µg/L9 wells

Source: USGS ScienceBase 5f36baa782cee144fb3873e8 (manganese, pH, arsenic) and McMahon et al. (2019), Environ. Sci. Technol. 53:29–38 (nitrate, iron); aggregated by county with Census 2020 boundaries. USGS well samples; not a test of your well.

Acidic well water in Connecticut (low pH)

46% of 514 USGS-sampled wells in Connecticut had pH below 6.5. Acidic water corrodes copper pipes and fixtures and can leach lead and copper into your tap water — the usual fix is a whole-house acid neutralizer (calcite for mildly acidic water, soda-ash injection for very low pH). Counties with the highest share of acidic wells:

CountyWells below pH 6.5Median pHSampled
New London County67%6.058 wells
Tolland County60%6.435 wells
Middlesex County50%6.524 wells
Litchfield County46%6.5104 wells
Hartford County45%6.6186 wells
Fairfield County41%6.639 wells
New Haven County28%6.936 wells
Windham County28%6.832 wells

Source: USGS ScienceBase 5f36baa782cee144fb3873e8 (pH). Measured other wells, not a test of yours.

STEP 2 — TREAT WHAT YOU FIND

Match the filter to your test result

Carbon pitchers and faucet filters do not remove arsenic or nitrate. Reverse osmosis is the point-of-use fix; a whole-house system handles the rest of the home.

TOP PICK · ~$200

APEC ROES-50 5-Stage Reverse Osmosis System

5-stage RO, ★ 4.7 — removes arsenic, nitrate, lead, fluoride and PFAS.

Check price on Amazon →
WHOLE HOUSE

Whole-house well water system

Treats every tap, shower and appliance — the right scale for sediment, iron, sulfur and bacteria on a private well.

Compare on Amazon →
ARSENIC-RATED

Waterdrop arsenic-reduction filters

Under-sink units tested for arsenic reduction — the point-of-use fix for a well over the limit.

Shop on Waterdrop direct →

Affiliate links — we may earn a commission at no extra cost to you. Re-test after installing to confirm the system is working.

Connecticut well water: FAQ

Is there arsenic in well water in Connecticut?

Yes. USGS modeling estimates about 52,105 people in Connecticut use private wells with arsenic above 10 µg/L, across 8 modeled counties. Arsenic comes from natural bedrock and varies well to well, even between neighbors, so a lab test is the only way to know your own level.

Which Connecticut counties have the most arsenic in well water?

By modeled number of well residents over the arsenic limit: Tolland County (~12,109), Fairfield County (~11,418), New Haven County (~6,752). Counties with more private-well users rank higher, so a smaller county can still have a high share of affected wells.

How do I remove arsenic from well water in Connecticut?

Test first. If arsenic is present, a point-of-use reverse-osmosis system under the kitchen sink removes 90%+ of it; boiling does not remove arsenic (it concentrates it), and carbon pitchers and water softeners do not remove it either. Whole-house adsorptive arsenic media is used when levels are high. Re-test after installing and then annually.

Is nitrate a problem in Connecticut well water?

USGS models about 0% of Connecticut's private-well population (~0 people) above the 10 mg/L nitrate limit. Nitrate is highest in shallow wells near fertilized cropland, septic systems or livestock, and matters most for infants and pregnancy.

Do I need an acid neutralizer for my well in Connecticut?

Acidic well water is common in Connecticut. In USGS lab results from 514 wells across 8 Connecticut counties, 46% had pH below 6.5. The most acidic sampled counties are New London County (67% of 58 wells), Tolland County (60% of 35 wells), Middlesex County (50% of 24 wells). You only need a neutralizer if your own well tests below about 6.5 — signs include blue-green stains on fixtures and pinhole leaks in copper pipe. A calcite (or calcite/Corosex) neutralizer tank handles mildly acidic water (roughly pH 6–6.5); very acidic water usually needs soda-ash injection. Test first-draw lead and copper too, since acidic water dissolves both from plumbing.

High manganese in Connecticut well water — what should I do?

In USGS lab results from 222 wells across 8 Connecticut counties, 16% were above the EPA's 300 µg/L health advisory for manganese and 33% were above the 50 µg/L level where it stains fixtures and laundry black or brown. Sampled counties with the highest share over the health advisory: Middlesex County (40% of 5 wells), New London County (26% of 27 wells), New Haven County (22% of 18 wells). If your own test is over 300 µg/L, don't use the water for infant formula and use another source for drinking and cooking until it is treated — high manganese is linked to neurological effects, especially in babies and children. Boiling does not remove it. For the whole house, an oxidizing filter (greensand, Birm or air-injection) handles manganese, usually alongside iron; a water softener can remove low levels. For drinking water, a point-of-use reverse osmosis system reduces manganese at the kitchen tap. Retest after treatment to confirm it worked.

Use the filter selector · How to test your well · All states